Expanding the OmniBook Installing a RAM Expansion Module To remove a RAM expansion module Your OmniBook’s computer chips are extremely static-sensitive. Static electricity can permanently damage computer chips. Before starting, reading the caution on page 5-6 about how to handle RAM expansion modules. 1. From the Start menu, shut down the OmniBook. 2. Unplug the ac adapter, if present, and remove the battery. (Remove a second battery if one is installed.) 3. Turn the unit bottom side up and pry open the RAM cover. 4. Release the two metal latches at the sides of the RAM board, so the free edge of the board pops up. 5. Pull the module out of the connector. 6. Replace the door. 7.
Insert the battery. 5-8