establishing a network connection using the EIO module When setting up the printer by using a network connection, connect the printer to the network first, and then install the software. If an HP Jetdirect print server was purchased separately, install it in the printer. The print server must be installed before you install the printer software. The HP Jetdirect print server is pre-installed in the HP Business Inkjet 3000n and 3000dtn printer configurations. Note Start Windows and make sure no other Windows applications are running. Connect the network cable between the HP Jetdirect print server and a network port. Insert the Starter CD into the CD-ROM drive. The CD menu runs automatically.
Note If the CD menu does not run automatically, select the Start , and then click Run . At the command line box, type the letter of your computer’s CD-ROM drive followed by :\SETUP (for example, D:\SETUP. On the CD menu, click Install Printer Driver . Choose your language, and then click OK . Follow the instructions on the screen. Click Connected to the network , and then click Next . Click Basic Server or Peer-to-Peer Network Setup and click Next . Follow the instructions on the screen to complete the installation. 2-74 hp restricted setup & configure