For best results when printing multiple transparencies, use HP Premium Plus Inkjet Transparency Film. The steps to print on transparencies are: Load the transparencies into the optional multipurpose tray with the rough side up and the white strip feeding into the printer first. If the optional multipurpose tray is not installed, use Tray 2 or Tray 3 with the transparencies facing rough side down and the white strip pointing forward into the tray. Load no more than 50 transparencies in Tray 2 or Tray 3, and no more than 20 transparencies in the optional multipurpose tray.
In the printer driver, select Tray 1, Tray 2, or Tray 3 as the media source, and then select HP Premium Transparency as the media type. Print the document. heavy weight paper When printing on heavy paper, such as coated paper and photo paper, use the following guidelines: When printing on heavy paper (up to 0.52 mm or 0.02 inch thick), use Tray 1 or the optional multipurpose tray. They provide a straight-through paper path that allows the printer to handle heavy or thick paper without bending or curling the paper Use Tray 1 when printing a single sheet of heavy paper. If installed, use the optional multipurpose tray when printing multiple sheets of paper.
Do not use paper that is heavier than the media specification recommended for this printer. Doing so can cause misfeeds, jams, reduced print quality, and excessive mechanical wear. Caution To print on heavyweight paper using the manual feed, tray 1: In the printer driver, select Manual Feed as the media source, select the appropriate media type, and then print the document. When the LCD control panel displays MANUALLY LOAD [TYPE] [SIZE] , insert one sheet of paper of the correct type and size into Tray 1. Make sure the sheet is facing up and is against the left edge of the tray. If you are printing more than one page, insert another sheet of paper when prompted by the the LCD control panel.
To print on heavyweight paper using the optional multipurpose tray: Load the media face-up in the optional multipurpose tray. Position the media against the right edge (when facing printer) of the tray first, and then slide the media down into the tray. In the printer driver, select Tray 1 as the media source, and then select the appropriate media type. Print the document. use and maintain hp restricted 3-13