Using the Phillips screwdriver, remove the three screws (two long screws on top and one short screw on the front left). Technology Code (DD): Using a Phillips screwdriver, remove the four screws (two long screws on top, one short screw on the top right, and one short screw on the front left). • Tilt the front of the LED PCA up to detach the two connectors on the bottom. • Lift the PCA out. Heatsink LED PCA CPU module Modem PCA Floppy disk drive CD-ROM drive Motherboard Bottom case Figure 2-11. Removing the CPU and Motherboard Note: Omnibook XE2-DB shown. Some details differ from Omnibook XE2-DD. 8. Remove the modem PCA (on the right): • Using the Phillips screwdriver, remove the two screws.
2-18 Removal and Replacement HP OmniBook XE2