Downloaded from https://www.everyspec.com MIL-STD-1311D INTERELEMENT LEAKAGE RESISTANCE, COLD 1. Purpose. The purpose of this test is to measure interelement leakage resistance. 2. Procedure. When using the circuitry shown on figure 1366-1, the resistance (for example, R = V/I) between the specified elements should be greater than the limit specified. All other unused elements shall be disconnected. Voltage (V, and its polarity) on the elements under test shall be as specified on the TSS. METHOD 1366A NOTE: Other instrumentation producing equipment results may be used. FIGURE 1366-1. Test circuit for interelement leakage resistance cold. METHOD 1366A 1366-1 28 March 1975