HOW TO PERFORM THE TIMER OPERATION HOW TO OPERATE IN SILENT MODE TIMER CANCELLATION MODE SILENT MODE 1 Press TIMER button. Timer mode begins. The current “The day of the week” and “the current time” are displayed. When the silent mode is set, the unit operates more silently reducing noise from the outdoor unit. The system applies the silent operation mode at the starting time to be set, and finish it after certain period has passed. Once the system is set to operate with the silent mode, the setting is applied everyday until it is canceled. J Silent Mode Setting 1 In the timer mode, set the current day of the week and current time. [ ] 2 Press button for five times.
И ( first press) И ( second press) И ( third press) И ( fourth press) И ( fourth press) 3 Press SET button. Timer Cancellation Mode begins. 4 Press or button. By pressing or button, it is possible to choose the item to cancel. See page 6 step 1 to 7 2 Press SET button for three seconds or more. The remote control goes into silent mode setting and the following is displayed. 7 1 ” (lights) 3 Press or button. If button is pressed, “ ” is displayed. If button is pressed, “ ” is displayed. Select “ If you press the RESET button, the remote control return to the original screen. 4 Press SET button. The following setting is displayed.
1 3 5 7 2 4 6 8 ” (flashing) ” (lighting) ” (canceling all days of the week) 5 Press or button. Set the “ON TIME”. Set “Hour” If you press or button for a while, “Hour” display is changed by one hour, and stops when you stop pressing. Press button, and the displays is switched upwards. Set “Minute” If you press or button, the display increases or decreases by ten minutes. If you press the RESET button, the remote control return to the “ ” display. 6 Press SET button. The ON TIME is set and the following is displayed. If you press the RESET button, the remote control will return to the previous screen, and display “ (step 2 above) In case “ ” Was selected. 5 Press SET button.
The detailed setting of selected timer mode are displayed as shown below. (But if not set, “ ” is displayed) In case “ ” was selected. All the Weekly timer setting will be canceled if you proceed the following steps. To cancel a part of the timer setting, please see “Weekly timer Mode Setting Canceling” on page 9. 5 Press SET button. The settings are displayed as shown below. (But if not set, “ ” is displayed) J Canceling Silent Mode (Setting) Select “ ” in step 2 , press SET button and silent setting is canceled ending the silent mode. ” is displayed.
” (flashing) ” (lit for two seconds) И ” (flashing) ” (lighting) ” is selected> If you would like to quit cancellation, press the RESET button to return to the “ ” display. (step 4 above) 6 Press SET button. The display of the detailed timer setting is turned off, and after the message “ ” is displayed for two seconds, ” is displayed again. (step 4 above) Repeat steps 4 to 6 to continue canceling timer mode settings. If you would like to quit cancellation, press the RESET button to return to the “ ” display. (step 4 above) 6 Press SET button to confimn. The day of the week display area turns off, and after the message “ ” is displayed for two seconds, and the display returns to “ ”.
(step 4 above) By this operation settings, for all days of the week are canceled. The remote control has main-sub units, silent setting cannot be operated with sub unit . After the silent mode is set, the following is displayed for 3 seconds at the set time and the unit returns to the original display. At the ON time : “ At the OFF time : “ If you select “ ”, you can continue the silent mode until it is canceled. At the first ON time, the display shows “ ” for three seconds and returns to original display. NOTICE 7 Press or button to set the duration. Select OFF time.
When you press button, and the duration is increased by two hours as below, “ Ж Ж Ж When you press button, and the duration is decreased by two hours. If you press RESET buttons, the remote control return to the “ON TIME SET”. 8 Press SET button. The setting is fixed and displayed. ATTENTION 7 Press ON/OFF button. Timer mode ends. • If you press button while timer mode is operative, timer mode is canceled and the display will return to the original display. If you do not press any button for several minutes after entering the timer mode, the timer mode ends and returns to the original display.
• If you press button while silent mode is operative, silent mode is canceled and the display will return to the original display. Note that the setting which has not been completed is canceled. ” is displayed, and the silent mode setting ends. The setting display turns off, and returns to original display. 10