Name and Function of Each Part ML-32000-340 / ML-16000-180 11 No. Name Description 1 Emergency stop button Stops operation of this machine immediately. 2 Mist filter cover Use this maintenance window to clean/replace the mist filter. 3 Ink rack Houses the ink cartridge. 4 Pause button Printing is paused and the print head comes to a stop either on the flushing plate or at the cleaning station area. 5 Front left cover 6 Belt This belt feeds fabric attached to it. 7 Belt cleaning unit Cleans ink and other foreign material adhering to the belt. Open this cover to clean the cleaning brushes and scrapers. 8 Water supply valve This is the water supply valve on the belt cleaning unit.
9 Entanglement detection sensor Located on the lower front side of the belt. Prevents hands and fingers from becoming caught in the belt. It is installed on the belt cleaning unit. 10 Tangled fabric detection sensor Located on the front side of the belt. Prevents fabric from becoming caught in the belt. 11 Front panel Location of the operating panel for performing operations on the front of the machine. (Page 23) 12 Main electric box Supplies power and houses the control PC. (Page 22) 13 Control PC Used to control Leonardo from the main unit.