Name and Function of Each Part 17 No. Name Description 1 Rotary beacon Lights up and the buzzer sounds if the rear cover is opened while the machine is printing. 2 Emergency stop button Stops operation of this machine immediately. 3 Rear panel Location of the operating panel for performing operations on the rear of the machine. (Page 24) 4 Fabric tension adjustment panel Use this panel to adjust the winding tension of the fabric. (Page 26) 5 Feeding unit The fabric roll is installed here, and the unit feeds the fabric into the machine. 6 Air supply regulator This regulator supplies compressed air. 7 Fabric edge sensor unit This sensor detects the left edge position of the fabric.
8 Slack sensor This sensor detects slack in the fabric. 9 Slack adjustment switch In slack mode, the machine feeds out fabric to create slack. 10 Pause button Printing is paused and the print head comes to a stop either on the flushing plate or at the cleaning station area. 11 Rear cover These are movable covers. Open these covers to perform main- tenance.