sub-type-dynamic sub-state-valid 5.22.22.45 51259 netconf rcvr-state-connected 1970-01-01T00:00:00+00:00 1970-01-01T00:00:00+00:00 Streams A stream defines a set of events that can be subscribed to, and this set of events can be almost anything. However, as per the definition of each stream, all possible events are related in some way. This section describes the supported streams. To view the set of streams that are supported, use management protocol operations to retrieve the streams table from the Cisco-IOS-XE-mdt-oper module (from the YANG model Cisco-IOS-XE-mdt-oper.yang) in the mdt-streams container. The following example shows how to use NETCONF to retrieve supported streams:
xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-mdt-oper"> * Enter a NETCONF operation, end with an empty line version="1.0" encoding="UTF-8"?> xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2"> xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-mdt-oper"> native yang-notif-native yang-push The example shows that three streams are supported: native , yang-notif-native , and yang-push . The stream native is not available for general use and can be ignored. Currently there are no CLIs to return the list of supported streams. Note Model-Driven Telemetry Streams Model-Driven Telemetry 33