This page shows the a active contro oller events in the selec ted Controlle er. 21 1 ５-４ A ctive Co ntroller E vents Pa ge (12) (11 (9) (4) (5) (10) (2) (3) (1) (6) (13) (7) (8) (2) (3) (6) (8) No Name D escription 1 Event Shows a list of active controller errors of the selected Controller. You can filter the events by event source. Event level of the active controller error is displayed in the “Event Level” Column. Event source of the active controller error is displayed in the “Event Source” Column. Event code of the active controller error is displayed in the “Event Code” Column. Event name of the active controller error is displayed in the “Event Name” Column.
If you click on an event, the line will be selected. If there are too many items in the list and not fit on the screen, you can scroll the list to view the non-displayed items.To scroll the list, drag or flick the scroll bar displayed on the right side of the list or the listed page. The polling and refreshing intervals for the list are 10 seconds or so. 2 Event Source Shows the event source used for filtering. The setting in [Event Source Selector Popup] is reflected here. 3 “Change” button Shows [Event Source Selector Popup] by clicking this button and filters the listed controller errors by event source.
4 “Controller Events” button/indcator The button is highlighted in yellow to notify the user that the displayed errors are controller events. The indicator to the left side of the button is lit in red if there is an active controller event, and lit in green if there is no controller event.