4 Screen Creation 2 To setting the PLC: In “CX-Programmer” open the project, in project workspace select [PLC Settings]. Be sure to set the communication mode of PLC [Built-in RS232C Port] to “Mode: Host Link, Baud: 115200, Format: 7,2,E”. Creating Macro This project uses Macro files to initialize the value of LW.B 10.0 to 1, thus initializing the Bit Lamp on the [Stop] screen. 1 User could establish a macro file with the icon through the menus or toolbar. 4-8 NB-series Programmable Terminals Startup Guide Manual(V109)