7 ． EtherNet/IP Connection Procedure 7.3. Setting Up the Controller Set up the Controller. 7.3.1. Starting the Sysmac Studio and Importing the Project File Install the Sysmac Studio and USB driver in the Personal computer beforehand. Start the Sysmac Studio and import the Sysmac Studio project file. 19 1 Connect the LAN cable to the CPU Unit Built-in EtherNet/IP port Controller (PORT1) of the Controller and End cover USB cable the USB cable to the peripheral Switching hub (USB) port. Then connect the Controller, Personal computer, Power Supply Unit DUT and Switching hub by referring LAN cable to 5.2. Device Configuration. 2 Turn ON the power supply to the Controller and Switching hub.
3 Start the Sysmac Studio. Click the Import Button. * If a confirmation dialog for an access right is displayed at start, select to start. 4 The Import file Dialog Box is displayed. Select OMRON FZ5 EIP EV100.smc _ _ _ 2 (Sysmac Studio project file) and click the Open Button. * Obtain the Sysmac Studio project file from OMRON.