26. Click on the ‘ Network’ / ‘Connect’ menus to connect to the network. 27. Click ‘ OK’ to connect . 28. Click ‘ OK’ to select ‘Use the existing network’. 29. Download the Ether N et/IP settings to the NJ by right clicking on the NJ in the network diagram, and select ‘ Parameter’ / ‘ Download’ . 30. When “Downloading parameters to selected devices will start”, dialog box appears, click ‘Yes’. 31. If the NJ is not in program mode, you will get the option to change modes, or download with the NJ in the current mode. Click ‘ Download with Current mode ’. 32. When “Download of device parameters was completed” dialog box appears, the NJ is ready to accept a connection from a CompactLogix.
Click ‘OK’. QSG-NX-S-STANDALONE - Version 3.2 Feb. 27, 2015 Page 32 OMRON AUTOMATION & SAFETY • © 2015 Omron Electronics LLC • www.omron247.com