2 Before You Begin 2-1 Installing the Sysmac Studio The Sysmac Studio Ver.1. ЈЈ 64-bit edition DVD (SYSMAC-SE200D-64) is the Support Software that you use for the Robot Integrated System. On it, you can set up the configurations and parameters, you can create programs, and you can debug and simulate operation. 1 Set the Sysmac Studio installation disk into the DVD-ROM drive. The setup program is started automatically and the Select Setup Language Dialog Box is dis- played. 2 Select the language to use, and then click the OK button. The Sysmac Studio Setup Wizard is started. 3 Follow the instructions given by the Setup Wizard to complete the installation.
4 Restart the computer when the installation is completed. Additional Information • Refer to the Sysmac Studio Robot Integrated System Building Function with Robot Integrated CPU Unit Operation Manual (Cat. No. W595) for information on the system requirements for the computer to which you install the Sysmac Studio. • Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) if you are unable to install the Sysmac Studio with the above instructions. 2-2 NJ-series Robot Integrated System Startup Guide (O049)