Troubleshooting Solving Problems Solving Problems If your OmniBook has a problem, find the symptom below that matches your situation. Try the suggestions one at a time. Accessory Problems If a port replicator port isn’t working • Check that ac power is connected. • Try using the corresponding OmniBook port, while undocked. If you can’t boot from a CD in the CD-ROM drive • Check boot order in BIOS Setup (Boot menu). • Make sure you are using an internal OmniBook CD-ROM drive. You cannot boot from an external CD-ROM drive. • Check that the CD is bootable. • Reset the OmniBook. If the Zip drive isn’t working • Make sure the Zip drive is seated correctly—remove and reinsert.
• Check that drivers have been installed. • Reset the OmniBook. 8-3