Troubleshooting Solving Problems Infrared Problems If you have problems with infrared communications • Make sure the infrared light path is not blocked. • Check settings in BIOS Setup—from the System Devices menu, check that Infrared Port is enabled. • For infrared communications, an infrared driver must be installed and a BIOS Setup setting must be enabled. For details, refer to the drivers’ Readme files located in \OmniBook\drivers\Win95. • Check that only one application is using the infrared port. • If you have a Standard IR and Fast IR machine communicating with each other, make sure that they are set to the highest common speed (115200 baud). • Remove any PC Cards.
An IRQ conflict is possible if two PC Cards are plugged in. If an infrared printer doesn’t print • Make sure the infrared light path is not blocked. • An infrared driver must be installed and the BIOS Setup setting must be enabled. For details, refer to the drivers’ Readme files located in \OmniBook\drivers\Win95. • In Windows Help, use the Print Troubleshooter. 8-7