Remove dc bias voltage contacts (leaf springs) Step 1 Remove the following assemblies: • Remove the toner cartridge. See “Toner cartridge removal and replacement” on page 96. • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette from tray 2. See “Remove the cassette from tray 2” on page 97. • Remove the DIMM cover. See “Remove DIMM cover” on page 99. • Remove the rear cover. See “Remove rear cover” on page 100. • Remove the top cover. See “Remove top cover” on page 102. • Remove left cover. See “Remove left cover” on page 105. • Remove the duplexer tray and media handling assembly. See See “Remove duplexer tray” on page 120. • Remove the power supply assembly.
See “Remove power supply assembly” on page 122. Step 2 Identify the dc bias contact components. Figure 143. Identify dc bias contacts 164 Chapter 6 Removal and replacement C7058-90936