Remove tray 3 (250 sheet-feeder) drive solenoid Step 1 Remove the following assemblies: • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette. See “Remove tray 3 (250-sheet feeder) cassette” on page 166. • Remove the tray 3 feeder drive assembly. See “Remove tray 3 (250-sheet feeder) feeder drive assembly” on page 168. Step 2 Unplug the two-pin solenoid harness connector. Step 3 Remove the single solenoid mounting screw. Step 4 Lift out the solenoid. 170 Chapter 6 Removal and replacement C7058-90936