Remove tray 3 (500 sheet-feeder) drive solenoid Step 1 Remove the following assemblies: • If installed, remove tray 3. See “Remove tray 3” on page 97. • Remove the cassette. See “Remove tray 3 (500-sheet feeder) cassette” on page 171. • Remove the tray 3 feeder drive assembly. See “Remove tray 3 (500-sheet feeder) feeder drive assembly” on page 173. Step 2 Unplug the two-pin solenoid harness connector. Step 3 Remove the two solenoid bracket-mounting screws. Step 4 Turn the bracket over to expose the solenoid and remove the single solenoid mounting screw. Step 5 Lift out the solenoid. C7058-90936 Tray 3 disassembly and assembly 175