Setting the cold reset default The customization variable will determine the default paper size after a cold reset. This is set to A4/ letter at the manufacturer. This variable might need to be reset when the formatter is replaced. Table 23. Setting the cold reset default 54 Chapter 3 Printer configuration C7058-90936 PJL Command Description E %-12345X@PJL C Start PJL job @PJL SET SERVICEMODE=HPBOISEID Enter service mode @PJL SET CRPAPER=LETTER Set cold-reset page size [=Letter/A4] @PJL SET SERVICEMODE=EXIT Exit service mode @PJL RESET Perform PJL reset E %-12345X C Exit PJL mode E Z C Print self test/configuration page E E C Reset the printer