7 ． EtherNet/IP Connection Procedure 19 5 Select eAIB Controller in the Type Column and set the addresses as shown below. New IP Address: 192.168.250.2 New Subnet Mask: 255.255.255.0 6 Click Apply. 7 The Adept Robot IP Address Setting Tool Dialog Box is displayed. Check the contents and click OK. The dialog box indicating “Applying” is displayed. Robot Controller is rebooted when completing the change of IP address. 8 Click Browse. 9 Check that the addresses displayed in the Current IP Address and the Current Subnet Mask Columns are the same as the ones in step 5. 10 Click of the Adept Robot IP Address Setting Tool Window to close it. 11 Turn OFF Switching hub.