Getting Started 14 For assistance, please visit https://shop.panasonic.com/support repeatedly to select the desired volume while talking. Note: R If booster is set to on, it will be changed to off in the next call. R This feature is not available while using the speakerphone. Recording a telephone conversation (2-way recording) This unit can record a telephone conversations during outside calls. 1 Press MMENUN during an outside call. 2 MbN: “2 way recording” a MSELECTN R The total recordable time is displayed. R The unit announces to both parties that the recording will start. R The unit starts recording. 3 To stop recording, press MMENUN a MbN:
“Stop recording” a MSELECTN R You can continue the conversation with the outside caller. Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above. 2 Confirm the call block number and press MYESN.
R The call block number is stored in the call block list, confirmation tone sounds *1 and “Call blocked” is displayed, and then the call is disconnected. *1 Confirmation tones are used with permission of © 2018 Copyrights Vision Inc. Note: Refer to the online Operating Instructions to configure the following features: – Storing unwanted callers beforehand – Block unknown CID (Caller ID) Unblocking all call block numbers 1 MCALL BLOCKN 2 MbN: “Single number” or “Range of numbers” a MSELECTN 3 MMENUN a MbN: “Unblock all” a MSELECTN 4 MbN: “Yes” a MSELECTN 5 MbN:
“Yes” a MSELECTN a MOFFN Automated call block With automated call block, the unit screens incoming calls before ringing for allowed calls, or ends the calls