Panasonic KX-TGU430 — Telemarketing call block

Getting Started For assistance, please visit https://shop.panasonic.com/support 15 without ringing for calls identified as robocalls, telemarketing calls, or other undesirable calls (Caller ID subscribers only). The unit will play the greeting message for automated call block and prompt the caller to enter an access code in order for the unit to identify whether the call is automated. You can set the unit to block or unblock mode. The default setting is “Unblock”. Allowed number database Once the caller enters the access code, the caller’s phone number is memorized in the allowed number database as an unblocked number.

Callers from this database are allowed to connect without the access code from their next call. 100 entries can be stored to the database (22 digits max. each). Note: R When the database memory is full, the latest call received will replace the oldest number stored in the list. R The numbers stored in the database will be erased when you change the access code. R The numbers stored in the database cannot be displayed. Setting the automated call block 1 MMENUN#787 2 MbN: Select the desired setting. a MSAVEN 3 MbN: “Yes” a MSELECTN a MOFFN Note: R We recommend you perform a test run of the automated call block procedure to ensure that the automated call block feature is set correctly.

Adding to the allow name list You can allow specific callers to pass through by adding the caller’s name to the allow name list. You can store up to 100 names (16 characters max.). If the name stored in the allow name list matches the incoming Caller ID, the unit rings. Callers listed in the allow name list are not required to enter the access code. Adding allowed names from the caller list 1 MCN CID 2 MbN: Select the desired entry. a MMENUN 3 MbN: “Save allow name” a MSELECTN a MOFFN Telemarketing call block In addition to Automated call block (page 14), you can use Telemarketing call block to further screen calls to stop telemarketer calls from getting through.

Using this feature, you can ask callers to say their names, and after checking the names, you can decide whether to answer the calls or not.