Panasonic · 2 стр.
Panasonic Inverter User & Service Manual
Related manuals
Document text
Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. Fuse cover 2. Replace the fuse and close or attach the fuse cover. Figure B Fuse (5 ampere) Product Identification Marking is located on the bottom of the unit. Product Identification Marking is located on the rear of the unit. This symbol indicates separate collection of waste electrical and electronic equipment. More detailed information is contained in “Owner’s Manual ”.
Produkt For е redusere faren for brann, elektrisk stшt eller skade ре apparatet: Utsett ikke produktet for regn, fukt, drypping eller sprut. Ikke plasser objekter som er fylt med vжske, som vaser, ре apparatet. Bruk kun anbefalt tilbehшr. Fjern ikke deksler. Reparer ikke denne enheten selv, overlat service til kvalifisert servicepersonell. Vekselstrшmnett Nettstшpselet er trukket ut fra denne enheten. Installer denne enheten slik at nettstшpselet umiddelbart kan trekkes fra stikkontakten. Produkt Plasser ikke epen ild, slik som levende lys, oppe apparatet. Dette apparatet er beregnet for bruk under moderate klimaforhold.
Plassering For е redusere faren for brann, elektrisk stшt eller skade ре apparatet: Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et annet lukket sted. Pass ре at produktet er godt ventilert. Apparatets ventilasjonsepninger mе ikke dekkes til med aviser, duker, gardiner eller lignende. 1. Open the fuse cover with a screwdriver. Figure A Figure B Fuse (5 ampere) ADVARSEL FORSIKTIG Figure A NORSK Unit To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use only the recommended accessories. Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service personnel. Do not let metal objects fall inside this unit. Do not place heavy items on this unit. AC mains lead To reduce the risk of fire, electric shock or product damage, Ensure that the power supply voltage corresponds to the voltage printed on this unit. Insert the mains plug fully into the socket outlet. Do not pull, bend, or place heavy items on the lead. Do not handle the plug with wet hands. Hold onto the mains plug body when disconnecting the plug. Do not use a damaged mains plug or socket outlet. The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the socket outlet immediately. Attachment To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions. Keep the safety holder, the screws, and the wall mount brackets out of reach of children to prevent swallowing. Unit Do not place sources of naked flames, such as lighted candles, on this unit. This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. This unit is intended for use in moderate climates. Placement Place this unit on an even surface.
To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. AC mains lead Do not use AC mains lead with other equipment. (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark П or the BSI mark М on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. Caution for AC Mains Lead Precautions WARNING CAUTION Owner’s Manual Wireless Speaker System Model No. SC-ALL8 SC-ALL3 Panasonic Corporation Web Site:
http://panasonic.net p SQT0189 F0314BM0 C Panasonic Corporation 2014 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. http://panasonic.jp/support/ global/cs/audio/oi/ Declaration of Conformity (DoC) Hereby, “ Panasonic Corporation ” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.de Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany This product is intended to be used in the following countries. GB, DE, AT, BE, DK, SE, FR, IT, ES, NL, FI, GR, PT, PL, HU, CZ, SK, EE, LV, LT, SI, BG, RO, MT, CY, IE, LU, HR, NO, CH, IS, LI, TR This product is intended for general consumer. (Category 3) The WLAN feature of this product shall exclusively be used inside buildings. This product on purpose to connect to access point of 2.4 GHz or 5 GHz WLAN. This manual contains quick set up information. More detailed instructions are contained in “Owner’s Manual ” which can be downloaded at the links below. Manufactured by:
Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Model number suffix “EB” denotes UK model. EB EG WARNING Figure A Figure B Fuse cover Figure A Fuse (5 ampere) Figure B Fuse (5 ampere) ADVARSEL
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance. All other trademarks are trademarks of their respective owners. Google Play and Android are trademarks of Google Inc. Lights in blue. App Store is a service mark of Apple Inc. Download the app “Panasonic Music Streaming” (free of charge), etc. Input the required details on the settings page. More apps are available. For details, visit www.panasonic.com/global/consumer/homeav/allseries/service (This site is in English only.) Enjoying music Touch [iOS] :
App Store [Android] : Google Play TM Select “AllPlay XXXXXX_AJ” to connect to this unit. [iOS] : The settings page will be automatically displayed in the Internet browser. [Android] : Once you open the Internet browser, the settings page will be displayed. Turning the unit on Wi-Fi Proceed to the next step after the network indicator changes from blinking in blue and red to blinking in blue. Settings Wi-Fi settings 1 Go to Wi-Fi settings. Wi-Fi ® connection guide Turn the network standby on. The unit will turn on automatically from standby mode when selected as the output speakers. The power consumption in standby mode will increase.
Touch and hold both [-WPS] and [VOL +] until the mode indicator (amber) blinks once. Checking accessories The following steps are based on a smartphone. Do not connect a LAN cable. You can also connect this unit to the network using a WPS supported router or a LAN cable. For details, refer to “Owner’s Manual ”. 2 Wall mount brackets Setting up the wireless network 1 AC mains lead 1 Safety holder 1 Screw