XP-60 Apr. 1998 KEYBOARD DISASSEMBLY / 鍵盤分解手順 1. ATTACHING THE PCBs 1. 基板の取り付け方 Required Parts / 必要部品 1) First, turn the chassis over on the other side, being careful not to reverse the right and left ends. 1) まず、シャーシを左右が逆にならないように裏返し ます。 次に、 fig. 1 に示すように左側（鍵の低音側）より、 SPACER 12P を 4 個、シャーシの位置決め穴に合わせ て順に置いていきます。 （ fig. 2 参照のこと） 右側（高音側）には SPACER 13P を同様に置いてい きます。 Next, as shown in fig. 1, place SPACER 12P (4 pieces) on the chassis from the left end (the bass side of keyboard), aligning them with the posisioning holes provided on the chassis. (Refer to fig. 2.) In the same way, place SPACER 13P on the right side of the chassis (the treble side).
Bass Side Treable Side SPACER 12P x4 SPACER 13P fig.1 Positioning Hole of Chassis Positioning Holes of Chassis Positioning Holes of Chassis fig.2 12 PARTS No, PARTS NAME Qty. 70890767 SK-8A61 PWB HI-AFT ASSY 1 70890778 SK-8A61 PWB LOW ASSY 1 01015134 SK-8A RUBBER SWITCH 12P 4 01015145 SK-8A RUBBER SWITCH 13P 1 22205597 SK-8 PCB SPACER 12P 4 22205598 SK-8 PCB SPACER 13P 1 40012256 BINDING TAPTIGHT B 3x10mm ZC 24