You are recommended to perform the Advance calibration routine, to ensure the optimum print quality. Load a sheet or roll of paper and then select menu. See “Advance Calibration Routine” on page 22. During the loading of paper, the printer has detected that the paper is skewed too much, that is, it has not been loaded straight enough. (‘Skew’ is the angle between the actual paper edge and the correct line.) Either : Press the Enter Or : Press the Cancel key to cancel paper loading. You are recommended to perform the Advance calibration routine, to ensure the optimum print quality. Press the Enter key to create the calibration pattern.
See “Advance Calibration Routine” on page 22. Message Front-Panel Error Messages 33 Paper advance calibration is recommended. Load paper and select Paper advance calibration. Press ENTER to finish Paper advance calibration is recommended. Press ENTER to calibrate Paper loaded with too much skew Press ENTER to retry Press CANCEL to abort Message Explanation and Action Paper advance calibration is recommended. Press ENTER to calibrate You are recommended to perform the Advance calibration routine, to ensure the optimum print quality. Press the Enter key to create the calibration pattern. See “Advance Calibration Routine” on page 22.