Enabling Cisco IOS HTTP Services for RESTCONF Perform this task to use the RESTCONF interface. SUMMARY STEPS 1. enable 2. configure terminal 3. restconf 4. ip http secure-server 5. end RESTCONF Protocol Enabling Cisco IOS HTTP Services for RESTCONF Command or Action Purpose Step 8 aaa authentication login default group group-name local Example: Device(config)# aaa authentication login default group ISE local Sets the specified group name as the default local AAA authentication during login. Step 9 aaa authentication login list-name none Example: Device(config)# aaa authentication login NOAUTH none Specifies that no authentication is required while logging into a system.
Step 10 aaa authorization exec default group group-name local Example: Device(config)# aaa authorization exec default group ISE local Runs authorization to determine if an user is allowed to run an EXEC shell. Step 11 aaa session-id common Example: Device(config)# aaa session-id common Ensures that session identification (ID) information that is sent out for a given call will be made identical. Step 12 line console number Example: Device(config)# line console 0 Identifies a specific line for configuration and enter line configuration mode. Step 13 login authentication authentication-list Example: Device(config-line)# login authentication NOAUTH Enables AAA authentication for logins.
Step 14 end Example: Device(config-line)# end Exits line configuration mode and returns to privileged EXEC mode. RESTCONF Protocol 24