Example: Example returning /restconf: The client might send the following: GET /.well-known/host-meta HTTP/1.1 Host: example.com Accept: application/xrd+xml The server might respond as follows: HTTP/1.1 200 OK Content-Type: application/xrd+xml Content-Length: nnn xmlns='http://docs.oasis-open.org/ns/xri/xrd-1.0'> rel='restconf' href='/restconf'/> Example of URIs:
• GigabitEthernet0/0/2 - https://10.104.50.97/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=0%2F0%2F2 • fields=name – https://10.104.50.97/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=0%2F0%2F2?fields=name • depth=1 - https://10.85.116.59/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet?depth=1 • Name and IP - https://10.85.116.59/restconf/data/Cisco-IOS-XE-native:native/interface?fields=GigabitEthernet/ip/address/primary;name • MTU (fields) - https://10.104.50.97/restconf/data/Cisco-IOS-XE-native:native/interface?fields=GigabitEthernet(mtu) • MTU - https://10.85.116.59/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=3/mtu • Port-Channel - https://10.85.116.59/restconf/data/Cisco-IOS-XE-native:native/interface/Port-channel • “Char” to “Hex” conversion chart:
http://www.columbia.edu/kermit/ascii.html Displaying Version Information The Cisco-IOS-XE-install-oper module that has various nodes to display the version information. The following sample RPC shows the some of the supported nodes of the Cisco-IOS-XE-install-oper module and the response from the host that contains the major and minor release version: xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="urn:uuid:7d0908d8-0d5f-4521-9d7b-380b81304776"> xmlns="http://cisco.com/ns/yang/Cisco-IOS-XE-install-oper"> RESTCONF Protocol Displaying Version Information RESTCONF Protocol 3