V1.1 15 Items Specifications Running function Frequency setting channel Control panel potentiometer setting: ▲、▼control panel keys setting; Function code setting: Serial port setting; Terminal up/down setting: Input Analog voltage setting: Input Analog current setting: Input pulse setting; Combination ways setting; Above ways are switchable.
Input channel 8 digital input terminals, 1 of which supports up to 100KHZ high speed pulse input 2 analog input terminals, 1 support 0~10V voltage input 1 support 0~10V voltage input or 0~20mA current input Output channel 1 high-speed pulse output terminal (optional open collector type), supporting square wave signal output of 0~100Khz 1 digital output terminal 2 relay output terminals (≥5.5kw), one relay below 5.5kw 2 analog output terminals, support 0~20mA current output or 0~10V voltage output (≥5.5kw 2 terminals) ＜5.5kw 1 terminal Control panel LED digital display Display setting frequency, output voltage, output current, etc.
External meter display Display output frequency, output current, output voltage, etc. Key lock All the keys can be locked Parameter copy Function code parameters can be copied between inverters when use remote control panel Protection function overcurrent protection; overvoltage protection; undervoltage protection; overheating protection; overload protection, etc. Input phase loss protection ( model>2.2kw) Optional parts Braking unit: remote control panel: cable: panel mounting feet, etc.
Environment Environment Indoors, free from direct sunlight, dust, corrosive gas, oil mist, steam, water dropper salt, etc Altitude Lower than 1000m (derating is necessary above 1000m) Ambient temperature －10℃～＋40℃