RIEVTECH STUDIO SOFTWARE MANUAL When the window in which the timer is located is closed and the other window is opened, the timer execution is triggered. l Condition for stop The condition for stop refers to the condition under which the timer stops execution. It is same to the “ Trigger Condition ” . The condition for stop is also edge-triggered. Ш Timer will stop when the window closed The “ Condition for stop ” of the timer is “ Timer will stop when the window closed ” by default.If you want to end the timer execution in advance, select the other condition for stop:
Ш Stop when specified count value reached You can use the condition for stopto make the timer end automatically after repeating the specified number of times. Wherein, for the specified number of times, you can directly enter it by Constant, or you can specify a word register to control the timer execution times by Variable. Note: When the trigger condition is "Trigger when the window is closed," the condition for stop will be directly selected as the “ Stop when specified count value reached ” and the number of times is set to 1 and not editable. This kind of timercan only be executed once. 211