RIEVTECH STUDIO SOFTWARE MANUAL It can be seen that the sampling addresses of multiple channels could be non-continuous addresses. Samples Each Time The default is 1, which means 1 point per sample. When the value is set more than 1, the sampling points of each channel is changed to the set value. 4.10.2.9 PLC Control The "PLC Control" attribute is used to execute an action according to the change of the address of the local HMI or the controller connected to the local HMI. This is a global Attribute.That is, the action of the “ PLC Control ” will be executed regardless of which onethe current screen window is, as long as the conditions are met.
After clicking the menu command "Setup / System Settings / PLC Control", the "PLC Control" settings page will be opened. It is shown as below. 426