RIEVTECH STUDIO SOFTWARE MANUAL l Use IP You can set the IP address of the remote HMI by Fixed or Variable. The default setting mode is “ Fixed ” . And the default fixed IP address is “ 192.168.0.1 ” . For example,the IP addressof HMI1 is “ 192.168.0.10 ” and the IP address of HMI2 is “ 192.168.0.20 ” . For the project of HMI1, you need set the IP address of the remote HMI “ 192.168.0.20 ” . When you set the IP address of the remote HMI by Variable, a word register address needs to be given as the start address. There are 4 word registers which is from the start word register. They are used to save the 4 segments of the IP address. It is shown as below. 453