RIEVTECH STUDIO SOFTWARE MANUAL There are four moving direction: Left To Right, Right To Left, Top To Bottom and Bottom To Top. Select one to be the moving direction of fonts scrolling. 1 Moving Direction 2 Step Length The fonts scroll step by step. The distance of two steps is Step Length. The unit of Step Length is pixel. For example, setting Step Length 10 means that the fonts move 10 pixels per second. 3 PixSpeed The option “ PixSpeed ” is used to set the moving speed of fonts scrolling. The unit of PixSpeed is 0.1 seconds. The range of PixSpeed is from 1 to 255.
For example, setting PixSpeed10 means that the moving speed of fonts scrolling is 1 second.The process will be circulated after all fonts move out in the component size range. 4.13.10 Logic Control You can find the function of “ Logic Control ” if you select the option “ Conditional ” in the “ Control Settings ” property TAB of some component. Or you can find it if you select the option “ Conditional Display ” in the “ Display ” property TAB. You can also find it if you select the option “ Condition ” in the “ Trigger and Stop ” property TAB of the Timer component. This function can realize all kinds of logic operations or judgment easily and can reduce using macros. 525