RIEVTECH STUDIO SOFTWARE MANUAL 6 Multi-Copy Set the copy range, quantity, interval and direction, and make the addresses change in any rule to obtain more components (many components can be copies and pasted integrally, and the addresses will change orderly). 7 Paste Paste the content of the clipboard onto the project. 8 Delete Delete the selected components from the project. 9 Inching Move left/right/up/down for one unit. 10 Alignment It is effective only when many components are selected. It is used to align these components on the left, on the vertical middle line, on the right, on the up, on the horizontal middle line, or on the bottom.
11 Size It is effective only when many components are selected. It is used to set these components to the same width, height or same size. 12 Layer It is effective only when the component is selected. It is used to set the component to the top, to the bottom, to the previous layer, to the next layer, or set many components in the same horizontal space or in the same vertical space. 13 Same Color It is effective only when many components are selected. It is used to set all components in the same color. 14 Group Integrate many components. 15 Ungroup Make the components of group to restore into individuals. 16 Center horizontally Center all selected components horizontally in the window.
17 Center vertically Center all selected components vertically in the window. 18 Lock Lock the position of the component and stop it from size adjusting or position adjusting. 80