ROLAND — ROLAND SC 8850 SERVICE NOTES

Jun,1999 SC-8850 11 操作に誤りがあったり、データが正しく処理されなかったと きは、ディスプレイにエラー・メッセージが表示されます。 下記のエラー・メッセージへの対応に従ってください。 Checksum Error 原因: 受信したエクスクルーシブ・メッセージのチェック サムが違います。 対応: SC-8850 に送信したデータの内容をチェックして、 もう一度送信してください。また、 MIDI ケーブルが 断線していないかを確認してください。 MIDI Buff.

Full 原因: SC-8850 が多量の MIDI データを短時間で受信した ため、処理できません。 対応: 多量の MIDI データを短時間で送信していないかどう か調べてください。 MIDI Off Line 原因 1 :MIDI IN コネクターに接続している MIDI 機器の電源 が切れた可能性があります。 対応 1 :SC-8850 に問題はありません。接続している MIDI 機器の電源を確認してください。 原因 2 :MIDI ケーブルが抜けているか、断線している可能性 があります。 対応 2 :MIDI ケーブルを調べてください。 USB Off Line 原因 1 :USB コネクターに接続しているコンピューターの電 源が切れた可能性があります。 対応 1 :SC-8850 に問題はありません。接続しているコン ピューターの電源を確認してください。 原因 2 :USB ケーブルが抜けているか、断線している可能性 があります。 対応 2 :USB ケーブルを調べてください。 No Instrument ------------- 原因: SC-8850 が備えていない音色(インストゥルメント) が指定されました。 対応: 直前に選んでいた音色名が表示され、その音色が鳴 ります。 インストゥルメント一覧表( P.167 )をよくご覧にな り、正しいバンク・ナンバーとプログラム・ナン バーを指定してください。 No Drum Set 原因: SC-8850 が備えていないドラム・セットが指定され ました。 対応: 直前に選んでいたドラム・セット名が表示され、そ のセットの音が鳴ります。 ドラム・セット一覧表( P.187 )をよくご覧になり、 正しいプログラム・ナンバーを指定してください。 ERROR MESSAGES /エラーメッセージ /エラーメッセージ /エラーメッセージ /エラーメッセージ Checksum Error Cause:

The check sum of the received Exclusive message is incorrect. Action: Check the data which was transmitted to the SC- 8850, and transmit it once again. Also make sure that the MIDI cable is not broken. MIDI Buff. Full Cause: Too much MIDI data was received by the SC-8850 all at once, so it could not be correctly processed. Action: Make sure that excessive amounts of MIDI data are not transmitted all at once. MIDI Off Line Cause 1:It is possible that the power has been turned off for the MIDI device connected to MIDI IN. Action 1:The problem is not with the SC-8850. Check the power of the connected MIDI device. Cause 2:It is possible that a MIDI cable has been pulled out or has a short.

Action 2:Check the MIDI cables. USB Off Line Cause 1:It is possible that the power has been turned off for the computer connected to MIDI IN. Action 1:The problem is not with the SC-8850. Check the power of the connected computer. Cause 2:It is possible that a USB cable has been pulled out or has a short. Action 2:Check the USB cables. No Instrument ------------- Cause: A sound (Instrument) which the SC-8850 does not have has been selected. Action: The previously selected sound name will be displayed, and that sound will be heard. Carefully refer to the tables on Instrument List (p.167), and specify the correct Bank number and Program number. No Drum Set Cause:

A Drum Set that the SC-8850 does not have has been selected. Action: The previously selected Drum Set name will be displayed, and that set will sound. Carefully refer to the tables on Drum Set List (p.187), and specify the correct Program number. If operation is incorrect or if the data cannot be processed correctly, an error message will appear in the display. Consult the following list and take the appropriate action.