7.4.5. Transferring the Safety Application Data Transfer the safety application data to the Safety Controller. Regardless of the operating mode of the Safety CPU Unit, devices or machines may perform unexpected operation when data is transferred , such as configuration data, setup data and device variables, from Sysmac Studio. application data. Always confirm safety at the destination node before transferring the safety 28 1 In the Multiview Explorer, select new Controller 0 in the _ _ Controller Selection Box. 2 Select Synchronize from the Controller Menu. 3 The Synchronization Dialog Box is displayed. Check that the data to transfer (NX as an example) is selected.
Click Transfer To Controller. *After executing "Transfer To Controller", the Sysmac Studio data is transferred to Controller, and the data is synchronized. 4 The dialog box on the right is displayed. Confirm that there is no problem, and click Yes. A screen is displayed stating "Synchronizing".