SC-B9580 User's Guide Basic Operations See the following according to your needs. Replacing Media that is not Expended U “Replacing Expended Media” on page 42 U “Replacing Media that is not Expended” on page 42 Follow the steps below when replacing media that is still being used. Replacing Expended Media 1. Cut the media. If the media runs out during printing, one of the following media-out errors is displayed on the control panel screen, depending on how the media ran out. 2. Remove the media. ❏ When the end of the media has come off the roll core 3. Remove the rewound media.
U “Removing the Take-up Roll” on page 43 Settings for cutting media If the following settings are set to On in advance, when the media is fed to the cutting position, the remaining amount of media and the printer's information are printed, and then the end of the media is fed to the cutting position. Press How To... to remove the roll core of the finished media and the rewound media while checking the procedure on the panel's screen. Follow the on-screen instructions.
❏ Remaining Amount Management ❏ When the end of the media is still attached to the roll core ❏ Media Remaining Information for Information Printing at Media Cut ❏ Print Information for Information Printing at Media Cut To print the remaining amount of media, set Remaining Amount Management and Media Remaining Information to On . You can print the length of the unprinted media on the media that you will remove, and then the next time you load this media, you can enter the printed length in the Remaining Amount Management setting for accurate management of the amount of media remaining.
Open the printer cover and remove the roll core of the finished media and the rewound media while checking the procedure on the panel's screen. To continue printing, load new media without canceling the print job. When new media is loaded and the printer is ready to print, the rest of the job is printed. Information about the printer, such as the registered media number at the time of printing, is printed to help you load the media the next time it is used. See the following for details about Remaining Amount Management and Information Printing at Media Cut. U “Loading Media” on page 38 42