SC-B9580 User's Guide Basic Operations U “Media Settings Menu” on page 92 D Press See Description to remove the rewound media while checking the procedure on the panel's screen. U “General Settings Menu” on page 83 Cutting media ❏ The heater may be hot; observe all necessary precautions. Failure to observe the necessary precautions could result in burns. Caution: A Confirm that the printer is ready to print. B Press (feed media to cutting position) on the control panel screen. ❏ When cutting media, be careful not to cut your fingers or hands with the cutter or other blades. Removing Media A Flip the media loading lever to the back.
C Press Feed to Cut Position to feed the end of the print to the cutting position. B Press How To... and follow the on-screen instructions to remove the media. Changing Feed Position Adjustment allows you to adjust the feed rate relative to the standard value. If you want to adjust the margins for the print results and so on, adjust the feed position, and then press Feed to Cut Position . Removing the Take-up Roll You can also watch the procedure on YouTube. 43