SC-B9580 User's Guide Basic Operations ❏ When using the Information Printing function As shown in the illustration, the size of the left and right sides of the image print area is reduced by the amount of information to print. Areas to be used to print information vary according to the settings. Here, an example of the smallest image print area for the following settings is shown. ❏ ❏ A Media cut position B Printable area Image print area Print area of nozzle check patterns Event Marking area * When Width Detection is set to Off , the set value (300 to 1950 mm [11.81 to 76.77 in.]) is applied. The arrow indicates the feed direction.
55 for the Event Marking of the Information Printing function: Left and rig for the nozzle check patterns of the Information Printing function: Left a vent Marking of the Information Printing functi ozzle check patterns of the Information Printing on: Left and rig function: Left a