SC-B9580 User's Guide Basic Operations *4 Note the following points when setting margins. ❏ Leave margins of 10 mm (0.39 in.) or more when using media edge plates. Narrower margins could result in the printer printing on the media edge plates. ❏ If the total of the print data width and set left and right margins exceeds the printable area, a portion of the data will not be printed. Note: If the following points are not observed when Width Detection is set to Off , printing may occur outside the left and right edges of the media. Ink used outside the edges of the media will stain the inside of the printer. ❏ Ensure that the print data width does not exceed the loaded media width.
❏ When media is loaded to the left of the standard position for the right edge, align the Print Start Position setting with the position where the media set. U “General Settings Menu” on page 83 57