SC-B9580 User's Guide Control Panel Menu 86 Item Parameter Explanation Printer Settings Margins Side(Right) 3 to 25 mm (5*) (0.12 to 0.98 inch [0.20*]) Sets the width of the right margin when media is loaded in the printer. See the following for more information. U “Printable Area” on page 52 Side(Left) 3 to 25 mm (5*) (0.12 to 0.98 inch [0.20*]) Sets the width of the left margin when media is loaded in the printer. See the following for more information. U “Printable Area” on page 52 Margin Between Pa- ges 0 to 999 mm (10*) (0.00 to 39.33 inch [0.39*]) Sets the margin between printed pages. For single-page print jobs, this is the margin placed between jobs.
Width Adjustment -10.0 to 10.0 mm (0*) (-0.394 to 0.394 inch [0.00*]) You can adjust a margin between pages. Even after making adjustments, the size of the margin may change, depending on the media and usage environment. The margin increases when the number is moved in the + direction, and decreases when the number is moved in the - direction. U “Printable Area” on page 52 Print Start Position 0 to 1000 mm (0*) (0.00 to 39.37 inch [0.00*]) Adjust this parameter if you want to print from the near center of the media or if you want to shift the printed area left from the Side(Right) setting. The area from the right edge of the media is left blank using the width set in Print Start Position.
If a value is selected for Side(Right), an additional area corresponding to the width selected for Side(Right) will be left blank. See the following for more information. U “Printable Area” on page 52