Generac 2700 PSI Pressure Washer SPECIFICATIONS PRESSURE WASHER MAINTENANCE Rated Pressure . . . . . 2700 psi Flow Rate . . . . . . . . . . 2.5 gallons per minute (gpm) Check and Clean Inlet Screen Detergent . . . . . . . . . . Use detergent approved for pressure washers Examine the screen on the water inlet. Clean it if the screen is clogged or replace it if screen is damaged. Water Supply Temp . Not to Exceed 100°F Automatic Cool . . . . Will cycle when water Down System . . . . . . . reaches 125°-155°F Check High Pressure Hose Shipping Weight . . . . 90 lbs. GENERAL MAINTENANCE RECOMMENDATIONS The high pressure hose can develop leaks from wear, kinking, or abuse.
Inspect the hose each time before using it. Check for cuts, leaks, abrasions or bulging of cover, damage or movement of couplings. If any of these conditions exist, replace the hose immediately. CAUTION! Water spraying from a leak is capable of injecting material into skin. Inspect hose each time before using it. NEVER repair a high pressure hose. Replace it with another hose that exceeds the maximum pressure rating of your pressure washer. The pressure washer warranty does not cover items that have been subjected to operator abuse or negligence.To receive full value from the warranty, the operator must maintain the high pressure washer as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your high pressure washer. Check the spray gun and adjustable nozzle extension assembly for wear. Check Detergent Siphoning Tube All maintenance in this manual and the engine owner’s manual should be made at least once each season. Examine the filter on the detergent tube and clean if clogged.The tube should fit tightly on the barbed fitting. Examine the tube for leaks or tears. Replace the filter or tube if either is damaged.
Once a year you should clean or replace the spark plug, clean or replace the air filter.A new spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer. Please refer to your engine owner’s manual for more details. Cleaning Detergent Siphoning Tube If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine. If equipped with inflatable tires, keep the air pressure within 5 and 40 PSI. Place the chemical injection siphon/filter in a bucket full of clean water. Before Each Use Attach the black low pressure spray tip. Flush for 1-2 minutes. Check engine oil level. Check water inlet screen for damage.
Shut off the engine. Check in-line filter for damage. IMPORTANT: Simply shutting OFF engine will not release pressure in the system. When the engine has shut down, squeeze the trigger on the spray gun to relieve the pressure in the hose. Check high pressure hose for leaks. Check detergent siphoning tube and filter for damage. Check spray gun and nozzle extension assembly for leaks. Rinse out garden hose to flush out debris before connecting to pressure washer. 12