TROUBLESHOOTING CHART PROBLEM CAUSE CORRECTION Loss of drive 1. Drive wheels not turning with drive control engaged. 2. Belt not driving 1. Adjust or replace drive control cable. 2. Put belt on pulleys or replace belts if broken. Grass catcher 1. Cutting height too low. not filling (ifso 2. Lift on blade worn off. equipped) 3. Catcher not venting air. 1. Raise cutting height. 2. Replace blade. 3. Clean grass catcher. Hard to push 1, Grass is too high or wheel height is too low. 2. Rear of lawn mower housing or blade dragging in grass, 3. Grass catcher too full. 4. Handle height position not right for you. 1. Raise cutting height. 2. Raise rear of lawn mower housing one (1) setting higher. 3.
Empty grass catcher. 4. Adjust handle height to suit. 18