Seres — Seres Top-Load Washer User Manual & Installation Guide

Safety Instructions Features Operation Requirements Installation Instructions Washer Use Washer Care Troubleshooting Leveling circle Washer is level – the water touches the leveling circle all the way around. Washer not level - the water does not touch the leveling circle all the way around. 3. If your washer is not level, carefully tilt your washer just enough to adjust the leveling feet on the bottom front of your washer. Extend the feet only as much as is necessary. If the feet are extended too much, your washer may vibrate.

loosen lock Adjustable legs Power on Plug the power cord into a well-grounded, 3-prong, 120 Volt 60 Hz approved electrical outlet, protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord. 24