Delivery Drive Assembly Figure 6-38 Removing the Delivery Drive Assembly 1 Remove the covers (starting on page 6-6): Top Cover, Left Side Cover, Front Right Side Cover, Rear Cover/Rear Output Bin, and Tray 1. Remove the Output Assembly (page 6-21), Formatter Cage Assembly (page 6-20), Formatter Pan (page 6-39), and Fuser Assembly (page 6-18). The Delivery Drive Assembly is on the right rear side of the printer. 2 Remove the single screw. 3 Unplug the 3-pin connector shown. 4 Lift the Delivery Drive assembly upward, away from the printer. Removing Assemblies 6-41