Table 7-5. Alphabetical Printer Messages (continued) Control Panel Message Event Log Message Explanation Recommended Action MEMORY SETTINGS CHANGED The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O Buffering and Resource Saving. This usually occurs after removing memory from the printer, adding a Duplexer, or adding a printer language. You might want to change memory settings for I/O Buffering and Resource Saving (although default settings are usually best) or add more memory to the printer. MEMORY SHORTAGE JOB CLEARED The printer did not have enough free memory to print the entire job.
The remainder of the job will not print and will be cleared from memory. 1. Press [Go] to continue. 2. Change the Resource Saving setting from the printer’s Control Panel or add more memory to the printer. MEMORY SHORTAGE PAGE SIMPLIFIED The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred. Press [Go] to continue. The customer might want to add more memory to the printer. OFFLINE The printer is offline. Press [Go] to place the printer online. PERFORM PRINTER MAINTENANCE To ensure optimum print quality, the printer prompts the customer to have routine maintenance performed every 200,000 pages. Install the Printer Maintenance Kit.
You must reset the maintenance page count after performing maintenance by pressing [Item-] and [Value-] while turning the printer on. 7-24 Troubleshooting