Table 3-7. Paper Handling Menu (continued) Item Values Explanation OVERRIDE A4/ LETTER=NO NO YES Choose YES to print on letter size paper when an A4 job is sent, but no A4 size paper is loaded in the printer (or to print on A4 size paper when a letter job is sent, but no letter paper is loaded in the printer). Configure the Fuser mode associated with each paper type. (This is only necessary if you are experiencing problems printing on certain paper types.) NO : The Fuser mode menu items are not accessible. YES : Additional items appear (see below).
CONFIGURE FUSER MODE MENU=NO NO YES Note To see the default Fuser mode for each paper type, select YES , scroll back to the Information Menu, and print a menu map (page 3-8). [TYPE]= NORMAL NORMAL LOW HIGH This item appears only when CONFIGURE FUSER MODE MENU=YES . Most paper types are set to NORMAL by default. The exception is as follows: ROUGH=HIGH (The ROUGH=HIGH setting is only available with A4, letter, and legal sizes.) For a complete list of supported paper types, see page 1-12. Control Panel Menus 3-11