Table 3-10. Configuration Menu (continued) Item Values Explanation TONER LOW=CONTINUE CONTINUE STOP Determine how the printer behaves when Toner is low. The TONER LOW message will first appear when the Toner Cartridge is almost out of Toner. (About 100 to 300 sheets can still be printed.) CONTINUE : The printer will continue to print while the TONER LOW message is displayed. STOP : The printer will go offline and wait for further action. RAM DISK=OFF OFF ON AUTO Determine how the RAM disk is configured. This item appears only if there is no optional hard disk installed and the printer has at least 8 MB of memory. OFF : The RAM disk is disabled. ON : The RAM disk is enabled.
Configure the amount of memory to be used through the following item: RAM DISK SIZE . Note If the setting is changed from OFF to ON or from OFF to AUTO , the printer will automatically reinitialize when it becomes idle. RAM DISK SIZE=XXXK 0K and up (This value depends on the amount of installed memory.) Determine the size of the RAM disk. This item appears if RAM DISK = ON or AUTO . Press [– Value +] to change settings by increments of 100. Note This setting cannot be changed if RAM DISK=AUTO . Changing this value will cause the printer to reinitialize when it becomes idle. Control Panel Menus 3-23