SI30 Solar Pump Inverter Manual Indicator Light Meanings Parameter Initialization Setting F0.19 = 1 to complete the initialization of parameters. Specific operations as follows: 12 Stop/reset key Machine stops if press it while run/stop is controlled by keyboard. Its efficiency range is defined via function no [F4.03]. Inverter resets if press it in fault state (no reset if fault is not solved). Keyboard potentiometer Can be used as input channel for given frequency, upper frequency limit, given torque, given PID or PID feedback setting. Name State Meaning Unit indicator light Hz Spark Digital display given frequency. Hz On Digital display output frequency.
A On Digital display actual output current. V On Digital display input voltage. V Spark Digital display output voltage. S On Time unit is second. S Spark Time unit is ms, min, or h. RPM On Digital display motor speed. % Spark Digital display given PID. % On Digital display PID feedback. State indicator light FWD On Inverter is forward rotating. FWD Spark Inverter is reverse rotating. FWD Off Inverter stops. Function indicator light REV/JOG On Jog. REV/JOG Off Reverse.