Contents Connections Playback Settings Tips Appendix Audyssey ® o MultEQ ® XT Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see “Explanation of terms” ( v p. 241). MultEQ ® XT compensates for both time and frequency characteristics of the listening area based on Audyssey ® Setup measurement results. Selection is done from three types of compensation curves. We recommend the “Reference” setting. Reference (Default) : Selects the default calibrated setting with a slight roll off at high frequencies, which is optimized for movies.
0 “MultEQ ® XT”, “Dynamic EQ”, “Ref.Lev.Offset” and “Dynamic Volume” settings are stored for each input source. 0 When the sound mode is in the “Direct” mode, “MultEQ ® XT”, “Dynamic EQ” and “Dynamic Volume” settings cannot be configured. L/R Bypass: Selects the reference setting, but bypasses MultEQ ® XT on the front left and right speakers. Selects the calibrated setting which is optimized for small rooms where your listening position is closer to the speakers. Flat: Off: Do not use “MultEQ ® XT”. 0 When using headphones, “MultEQ ® XT” is automatically set to “Off”. Front panel Display Rear panel 146 Remote Index